Limburg®
Large-area commercial ceilings · high first-pass build, less downtime
Built for commercial ceilings and large interior walls. Fast drying and strong hiding, cutting schedule time and maintenance cost together.
Not one more coat — a reactive cure
A two-component water-based porcelain enamel. Part A (base) and Part B (hardener) cross-link on mixing to form a dense, porcelain-like film. It is not a film left behind by evaporating solvent, so adhesion, hardness and stain resistance are on a different scale.
Limburg: verifiable key figures
Every figure traces back to a third-party test report
Where Commercial Ceiling Series is used
Interior ceilings and walls · Large commercial projects and similar high-traffic areas, where film durability and cleaning tolerance matter most.
- Ultra-high hiding power
- Near-zero VOC, very low odour
- 100,000-scrub resistance
- Full-life physical anti-mould
- Anti-spatter performance
Full specification
Where to use it, where not to
Suitable for
- Interior ceilings and walls
- Large commercial projects
- Bathrooms / kitchens / balconies
- Multiple substrates and base surfaces
Not suitable for
- Permanently immersed environments
- Components that stay under water long term
Substrate → mixing → coating → curing
Substrate requirements
Application steps
- Mix parts A and B at the factory ratio, mechanically or by hand, for at least 3 minutes until uniform
- Roller or brush: add 5-10% clean water to adjust the feel; for spray follow the equipment guidance
- Apply two coats; recoat once the previous coat is touch-dry
- Apply at 5-35 °C with relative humidity below 80%
Different from conventional coating systems
| Film formation | Water evaporation, particle coalescence | A/B cross-linking cure |
| Film structure | Thermoplastic, softens with heat | Cross-linked, dense, porcelain-like |
| Scrub Resistance | Typical product level | 100,000 cycles◊ |
◊ From third-party test reports
How to use the trial kit
- 1The full pack arrives together with a 20 ml trial kit
- 2Try the trial kit first for feel and application
- 3Confirm with our team
- 4Open the full pack and start the project
Once the full pack is opened, cross-border orders cannot be returned or exchanged
