)}
Maastricht 项目实景
FDA 权威认证法国 A+ 认证REACH 合规
← Back to products honma/Products/Maastricht
Floor Protection Series

Maastricht®

Floor protection · skin-feel finish

A two-component water-based porcelain floor system. Friction coefficient above 0.7 and pull-off strength above 10 MPa: an eco alternative to epoxy for interior floors.

Extreme wear resistance: 20% above national standard3H surface hardnessAnti-slip coefficient > 0.7Includes a 20 ml trial kit (random colour)
Colours Metro Gray
HC-0099 #CACAC8 LRV 59
$17.5 /㎡
Get a quote
What it is

Water-based system, skin-feel surface

A two-component water-based porcelain floor coating that cures into a wear-resistant, slip-resistant skin-feel surface. Pull-off strength above 10 MPa bonds it firmly to the substrate, and a friction coefficient above 0.7 keeps grip even when wet.

Pack Size4.5 kg total (ratio A:B = 1:8)
Surface Hardness3H
Maastricht 应用实景
Key figures

Maastricht: verifiable key figures

3HSurface Hardness
Class AFire Rating
>0.7Friction Coefficient
>10 MPaPull-off Strength

Every figure traces back to a third-party test report

Where Floor Protection Series is used

Factory and underground garage floors (eco alternative to epoxy) · Bathroom / garage / stairwell walls and floors and similar high-traffic areas, where film durability and cleaning tolerance matter most.

  • Extreme wear resistance: 20% above national standard
  • 3H surface hardness
  • Anti-slip coefficient > 0.7
  • Class A fire-rated material
Technical specifications

Full specification

Gloss LevelCustomisable
ColourTransparent and white
Shelf Life24 months
Pack Size4.5 kg total (ratio A:B = 1:8)
Coverage (two coats)30 m²/4.5 kg (pigmented) / 45 m²/4.5 kg (clear)
Water AdditionSmall water addition (adjust flow to temperature)
Fire RatingClass A
Pull-off Strength>10 MPa
Surface Hardness3H
Friction Coefficient>0.7
VOC ContentNear zero; formaldehyde-free, low-odour formula
Pack4.5 kg total (ratio A:B = 1:8)
Colour systemhonma HC colour system (1,500 colours; 939 named codes published on this site)
Maastricht 空间氛围 Maastricht · application reference
Applications

Where to use it, where not to

Suitable for

  • Factory and underground garage floors (eco alternative to epoxy)
  • Bathroom / garage / stairwell walls and floors
  • Interior and exterior surfaces needing wear and slip resistance

Not suitable for

  • Floors with excessive moisture content that has not been treated
  • Industrial areas under heavy impact or high-temperature loads (assess separately)
Maastricht 应用实景
Application

Substrate → mixing → coating → curing

Substrate requirements

Moisture content
< 10%
pH value
< 10
Strength
Sound, no hollow areas

Application steps

  1. Mix parts A and B at the factory ratio and stir until uniform
  2. Add a small amount of water according to temperature to adjust flow
  3. Apply two coats; recoat once the previous coat is touch-dry
  4. Protect from water and traffic loads during curing
5–35 °CTemperature
below 80%Humidity
表干 2h（23℃）Touch dry
完全固化 4–7 天Full cure
Maastricht 应用实景
How it differs

Different from conventional coating systems

Film formationWater evaporation, particle coalescenceA/B cross-linking cure
Film structureThermoplastic, softens with heatCross-linked, dense, porcelain-like
Surface HardnessTypical product level3H◊

◊ From third-party test reports

How to use the trial kit

  1. 1The full pack arrives together with a 20 ml trial kit
  2. 2Try the trial kit first for feel and application
  3. 3Confirm with our team
  4. 4Open the full pack and start the project

Once the full pack is opened, cross-border orders cannot be returned or exchanged

$17.5 /㎡
Certification and service

System certifications

French A+Indoor air quality rating A+ View test report
FDA certification View test report
REACH 241 itemsAll 241 SVHC substances not detected View test report
Fire A2-s1,d0Coating system reaction to fire View test report
99.99% antibacterialAntibacterial efficacy and durability (datasheet)
Surface hardness3H (factory guide)
Pull-off strength>10 MPa
Friction coefficient>0.7
Anti-staticSurface resistivity 2.79×10⁴ Ω View test report
Trial kitShips with the full pack, not sold separately; 20 ml, random colour, no specific code
Order of useTry the trial kit for feel and application, confirm with our team, then open the full pack
ReturnsAn opened full pack cannot be returned or exchanged; unopened packs follow the order terms
Shipping and damageSchedule and customs clearance confirmed by destination; inspect on delivery and photograph damage for replacement
WhatsApp enquiry
WhatsApp QR

WhatsApp